Dovetail Rail system
Standard Humidifier for variable control of humidity
Care Plus 3000: Three-position tilt for easy, precise adjustment to 0º,3º, and 6º at either end of the bed
Care Plus 4000: Continuous Tilt allows smooth, unlimited adjustment from 0º to 12º

Integrates microprocessor-based controls with a modular design for efficient patient care. The GE Ohmeda Care Plus 4000 is an advanced incubator that provides superior thermoregulation with an integrated microprocessor-based controller. Optional active double-wall construction creates a precise and consistent environment for the neonate.

GE Ohmeda Care Plus 4000 Specifications

Dimensions

Incubator with Elevating Base:

Height: Overall height 54 to 62 inches (136.2 to 157.5 cm)
Elevating base adjustable from 35 to 43 inches (88.9 to 109.2 cm) mattress to floor
Depth: 71.1 cm/28 in
Width: 83.8 cm/33 in
Weight: 89 kg/195 lb

Incubator with Elevating Base:

Height: Overall height 54 to 62 inches (136.2 to 157.5 cm)
Elevating base adjustable from 35 to 43 inches (88.9 to 109.2 cm) mattress to floor
Depth: 71.1 cm/28 in
Width: 83.8 cm/33 in
Weight: 89 kg/195 lb

Drawer Packages for Elevating Base or Stationary Pedestal:

Overall: 28 x 29 x 46 cm/11 x 11.5 x 18.25 in
Single deep drawer: 25 x 23 x 42 cm/10 x 9 x 16.5 in
Dual drawer: 11 x 23 x 42 cm/4.5 x 9 x 16.5 in

Incubator with Cabinet:

Height: 141 cm/55 in
Depth: 64.6 cm/25.5 in
Width: 88.9 cm/35 in
Weight: 84 kg/185 lb

Incubator Characteristics:

Casters: 5 inch diameter, 2 locking, 2 non-locking
Mattress: 34.8 x 65 cm/13.7 x 25.6 in
Mattress to Hood: 16 in/41 cm
Door Height: 11 in/28 cm
Tilt: 0°, 3° and 6° (CP 3000)
Positions: Continuous from 0° to 12° (CP 4000)
Port holes: 6
Tubing ports: 6

Electrical Power Requirements

120 Vac 60Hz
Models: 115 V ±10% 5.7 amps
Conforms to IEC 601.1, UL 544 and CSA 22.2 No. 125 requirements
Nominal power consumption: 450 watts at maximum heater output
Line voltage compensation: Input voltage is monitored and the heat output is adjusted to compensate for line voltage variations
Leakage currents: Less than 100 micro amps on 120V units
Leakage at patient probe: Less than 50 micro amps on 120V unit

Operation Enviroment

Operating temperature range: 20° to 30°C/68° to 86°F
Storage temperature range: -25° to 60°C/13° to 140°F
Operating humidity range: 0 to 90%

System Control Characteristics

Microprocessor based control system: Self-test functions are performed at power-up and during normal operation
Patient Control (Servo) Mode: 35° to 37°C/95° to 98.6°F
Air Control (Manual) Mode: 20° to 37°C/73.4° to 98.6°F
Up to 39°C/102.2°F with control panel override switch
Air Velocity: Average <10 cm/sec with inner wall
Temperature variability: Less than ±0.3°C
Resolution: ±0.1°C or 0°F
Probe interchangeability: ±0.1°C/0.2°F
Average oxygen input concentration range:

5 L/min 25 to 45%
10 L/min 35 to 65%
15 L/min 45 to 70%

Humidification: Standard – 10 to 75% dependant on nursery environment and incubator temperature setting
Servo – 40

+1 (800) 259-5940

+1 (800) 259-5940

Categories

Brands

Equipment Divisions

Infant Incubators

GE Ohmeda Care Plus 4000 Infant Incubator - Refurbished

You recently viewed

SOUTHWEST MEDICAL

Legal Menu

Follow us

Subscribe