Stryker Secure Three S3 Hospital Bed

Stryker S3 Hospital Bed Features:

• Designed with onehand operation and an intermediate position for patient assistance during bed entry and exit.
• Scale optional - not included.
• iBed® awareness monitors local bed status information, alerting changes to preset positions visually, audibly or remotely.
• Depending on the number of waves you’ve configured the Intellivue X2 to show, the area of each wave automatically adjusts in size.
• Open architecture platform gives you clinical and financial flexibility to choose any support surface for the bed.
• Exclusive StayPut technology allows patient’s proximal location to remain essentially unchanged when the head of bed is raised, reducing the need for patient repositioning while keeping patients close to bedside belongings
• Overall Length: 93”
• Overall Width: Siderails Up: 41.5”
• Weight Capacity: 500 lb.
• Height Range: 16" - 30"
• Backrest: 0°-60°
• Knee Gatch: 0°-40°
• Trend./Reverse Trend: +12°/-10°
• Patient Surface: 35” W x 84” L
• Caster Diameter: 6”

• New Mattress

• Scale

1. Run serial number with OEM for necessary upgrades, recalls, and revisions
2. Disassemble and disinfect all components
3. Polish, replate, repaint, or replace all exterior components
4. Inspect all working components for wear and replace defective parts as necessary
5. Replace wheel and caster assembly
6. Replace safety switches
7. Replace lockout switches
8. Replace foot pedals if necessary
9. Inspect, clean, and lubricate head, knee, and high/low drive screws for reuse
10. Inspect nurse control, high/low, and degree indicator panels
11. Recalibrate brake and steer system
12. Reassemble refurbished components
13. Inspect and lubricate all pivot points
14. Inspect and lubricate instant CPR Cables and latch release (if applicable)
15. Inspect and lubricate siderail latches
16. Replace siderail plastics
17. Stage weight test weight tolerances and table movement through all available articulations
18. Apply new decals and safety information