Home » GE OEC 6600 Mini C-Arm System
GE OEC 6600 Mini C-Arm System
GE OEC 6600 Mini C-Arm System
GE

GE OEC 6600 Mini C-Arm System

Available
SKU: 1195
$20,500.00

If a formal quote is needed, add products to cart and submit a request.

Condition: Refurbished
Type: C-Arm
Lead Time: 90-Day Parts and Labor
Warranty: 90-Day Parts and Labor

GE OEC 6600 Mini C-Arm System:

The GE OEC 6600 is a cost-effective mini c-arm system ideal for medical professionals who focus on orthopedics and other extremities. It comes with edge enhancement features to ensure high quality images and proper diagnosis. This easily transportable C-arm comes with dual 16 inch high resolution monitors, and its 27"x27" footprint makes it an ideal product for space constrained areas.

GE OEC 6600 Features:

  • Designed For Extremity Imaging
  • 6" Dual-Mode Image Intensifier
  • Dual Monitor Workstation
  • Rotating Anode X-Ray Tube
  • 64-400 Image Storage
  • Last Image Hold
  • 512 x 512 Resolution
  • Standard CRT Monitors
  • Parts Compatibility w/ OEC 9600
  • Edge Enhancement
  • No Option for Built in Laser Aimer
  • Power: 40-80 kVp
  • 3.5 Floppy Drive
  • 27" x 27" Footprint

Dimensions:

  • Base: 64.25 in (H) x 27.25 in (W) x 27.25 in (D)
  • Weight: Approximately 250 Lbs

Transport Position:

  • Height: 64.25 in
  • Minimum width: 31.75 in
  • Minimum depth: 30.25 in

X-Ray Tube:

  • Fixed anode, tungsten filament
  • Focal spot: 0.25 x 0.25 mm
  • Target angle: 13.5°
  • Beam quality minimum: HVL 2.6 mm Al at 70 kV
  1. Run serial number with OEM for necessary upgrades, recalls, and revisions (software and firmware included)
  2. Verify presence, function, and performance of internal components including, but not limited to: High voltage x-ray generator, High voltage cables, X-ray tube, Image intensifier, Vertical lift assembly, Steering mechanism, Power supplies, and Monitor displays
  3. Repair, rebuild, or replace any internal components listed above that do not meet OEM specifications
  4. Perform complete system disassembly
  5. Disinfect all components
  6. Sand and repaint all previously painted surfaces using a 4-coat process as performed by OEM
  7. Reassemble refurbished components
  8. Inspect and replace wiring harnesses as necessary
  9. Lubricate all bearings and replace as necessary
  10. Clean and calibrate all locking and braking systems
  11. Inspect, clean, and lubricate high voltage cables
  12. Install new batteries
  13. Calibrate image quality to ensure optimum performance
  14. Calibrate all other systems according to OEM specifications
  15. Perform comprehensive manufacturer PM service prior to staging
  16. Configure system to customer's specified parameters
  17. Stage system for optimum performance and reliability
  18. Label machine and components to specified requirement
  1. Checkout through the website.
  2. Request e-invoice from sales@swmedical.com

We accept the following payment types:

  • Credit/Debit Card
  • Wire Transfer
  • ACH
  • Check

Southwest Medical accepts purchase orders from universities, schools, and government agencies.

You can submit your PO via email to sales@swmedical.com

Please allow us 24 hours to process orders. Payments can be submitted via credit/debit card, check, and wire transfer.

Purchase orders must be signed and contain following:

  • PO number
  • Item SKU
  • Item description
  • Quantity
  • Complete ship-to and bill-to addresses
  • Purchasing contact information

Net 30 terms must be approved before submitting an order. For more information, or to setup Southwest Medical as a vendor in your system, email sales@swmedical.com

Customer shall have a right to return for a refund within 30 days of delivery if products arrive not as advertised.

For a return to be accepted, an RMA number must be issued. Please call or email us to obtain an RMA number. Be sure to include the RMA number on all packages related to the return. All products returned may be subject to a restocking fee at SWM's discretion. Customers will be notified of restocking fee before issuance of RMA number.

For new products to qualify for a full refund, the item must be returned within the original package in brand new condition.