Inlet fitting options: No Fitting (1/8" FNPT), DISS Male, Tubing Nipple, Locking Gland, Vacuum Trap, Hydrophobic Filter
Outlet fitting options: No Fitting (1/8" FNPT), Chemetron Male, DISS Hand-Tight, DISS Nut & Nipple, Oxequip MedStar, Ohio Diamond, Oxequip '07 Series (Twist), Puritan-Bennett
Gauge: Accuracy: ± 5% full scale deflection
Modes: Continuous, Off, Intermittent
Vacuum Range: Continuous regulated vacuum maximum: 300 mmHg (40 kPa) Intermittent maximum vacuum: 150 mmHg (20 kPa)
Flow Rate: Continuous Suction: 80 LPM - Intermittent Suction: 8 LPM
Timing Cycles: ON Cycle: 15 seconds ± 3 seconds, OFF Cycle: 8 seconds ± 3 seconds
Safety Relief Valve Calibration: 150 mmHg (20 kPa) ±10%
Weight (Less Fittings): Approximately 20.5oz (574 grams)
Dimensions: Height 6.3", Width 3.3", Depth 4.2"

The mode selector knob is used to select the OFF (no flow), CONT(continuous, regulated suction), or INT (regulated intermittent suction mode).

The pressure adjustment knob controls the vacuum pressure that is delivered to the patient. Turning the knob clockwise (to the right) increases the vacuum level; turning the knob counter-clockwise (to the left) decreases the vacuum level. The mode selector knob should be used to turn the unit OFF, not the pressure adjustment knob.

The color-coded, dual-scale analog gauge includes a luminescent dial and needle, and is accurate to ±5% of full scale.

Color Side Grip Options (Black is standard, if other color is needed please make a request):

Purple
Baby Blue
Green
Mint
Red
Yellow
Blue
Pink
Lavender
Orange
White
Black

Continuous-Intermittent Wall Suction Regulator 1500 Series [New]