Physio-Control Lifepak 12 Defibrillator - Refurbished

The Physio-Control LIFEPAK 12 defibrillator/monitor, when in AED mode, is a semiautomatic defibrillator that uses a patented Shock Advisory System. This software algorithm analyzes the patient’s electrocardiographic (ECG) rhythm and indicates whether or not it detects a shockable rhythm. The LIFEPAK 12 defibrillator / monitor in AED mode requires operator interaction in order to defibrillate the patient.

The LIFEPAK 12 defibrillator/monitor offers the following optional features:

• Biphasic defibrillation waveform
• Semi-automatic defibrillation
• Noninvasive pacemaker
• Pulse oximeter
• Interpretive 12-lead ECG
• Noninvasive blood pressure (NIBP) monitor
• End-tidal CO2 (EtCO2) monitor
• Invasive pressure (IP) monitor
• Vital sign (VS) and ST monitoring
• Fax transmission
• Paddle accessories
• Electroluminescent (EL) display (The optimal viewability of an EL display is compromised in direct sunlight.)

Physio-Control Lifepak 12 Specifications

Physical

• Weight
• Basic defibrillator/monitor with QUIK-COMBO cable: 6.6 kg (14.5 lbs) (unit and QUIK-COMBO cable only – no batteries)
• Fully featured defibrillator/monitor with QUIK-COMBO cable: 8.0 kg (17.6 lbs) (unit and QUIK-COMBO cable only – no batteries)
• FASTPAK battery: 0.64 kg (1.4 lbs)
• FASTPAK 2 battery: 0.64 kg (1.4 lbs)
• LIFEPAK NiCd battery: 0.8 kg (1.7 lbs)
• LIFEPAK SLA battery: 1.27 kg (2.8 lbs)
• Height: 31.7 cm (12.5 in)
• Width: 38.9 cm (15.3 in)
• Depth: 21.7 cm (8.5 in)

Display

• Size
  • 140.8 mm (5.5 in) wide x 105.6 mm (4.2 in) high for LCD, or
  • 165.1 mm (6.5 in) wide x 123.8 mm (4.9 in) high for EL display
• Display Type
• 640 dot x 480 dot black and white LCD or amber and black EL display
• User selectable display contrast
• Displays a minimum of 4 seconds of ECG and alphanumerics for values, device instructions, or prompts.
• Option to display one or two additional waveforms
• Waveform display sweep speed: 25 mm/sec for ECG, SpO2, IP, and 12.5 mm/sec for CO2

Communications

• The device is capable of transferring data records by PC Card internal modem, external EIA/TIA modem, cellular modem, or serial connection.
• Supports EIA/TIA-602 compatible modems using Xon/Xoff or RTS/ CTS flow control at 9600-38400 bps.
• EIA/TIA-232E compatible at 9600, 19200, 38400, 57600 bps.
• Group III, Class 2 or 2.0 facsimile, (wired only).

Operating Modes

• Advisory Mode (SAS:) Provides all features available except manual defibrillation, synchronous cardioversion, pacing, and access to previous patient records.
• Manual Mode: Provides normal operating capability for ALS users.
• Archive Mode: Allows operator to transmit, print, edit, or delete previous patient records.
• Setup Mode: Allows operator to configure the instrument.
• Service Mode: Allows operator to execute device diagnostic tests and calibrations.
• Inservice Mode: Provides simulated waveforms and trend graphs for demonstration purposes.

Power

• Battery Only Configuration
• Choice of NiCd (FASTPAK or FASTPAK 2 battery, LIFEPAK NiCd battery 1.7 Ah or 2.4 Ah3) or SLA (LIFEPAK SLA battery)
• Dual battery capability
• Optional external AC Power Adapter
• Batteries charge while device operates from Power Adapter

Data Management

• The device captures and stores patient data, events (including waveforms and annotations), and continuous ECG waveform records in internal memory.
• The user can select and print reports and transfer the stored information via an internal modem and various serial transfer protocols.
• Report Types
• Three format types of CODE SUMMARY critical event record (short, medium, and long)
• •Initial ECG (except short format)
• •Auto vital sign measurements every 5 minutes
• 3-channel or 4-channel 12-lead ECG report
• Continuous ECG waveform records (transfer only)
• Trend Summary
• Vital Signs Summary
• Snapshot

ECG Monitor

• ECG is monitored via several cable arrangements. A 3-wire cable is used for 3-lead ECG monitoring. A 5-wire cable is used for 7-lead ECG monitoring. A 10-wire cable is used for 12-lead acquisition. When the chest electrodes are removed, the 10-wire cable functions as a 4-wire cable. Standard paddles or QUIK-COMBO pacing / defibrillation/ECG electrodes or FAST-PATCH disposable defibrillation / ECG electrodes are used for paddles lead monitoring.
• Lead Selection
• Leads I, II, III, (3-wire ECG cable)
• Leads I, II, III, AVR, AVL, and AVF acquired simultaneously, (4-wire ECG cable)
• Leads I, II, III, AVR, AVL, AVF, and C-lead acquired simultaneously, (5-wire ECG cable)
• Leads I, II, III, AVR, AVL, AVF, V1, V2, V3, V4, V5, and V6 acquired simultaneously, (10-wire ECG cable)
• EGG Size: 4, 3, 2.5, 2, 1.5, 1, 0.5, 0.25 cm/mV (fixed at 1 cm/mV for 12-lead)
• Heart Rate Display
• 20–300 bpm digital display
• Accuracy: ±4% or ±3 bpm, whichever is greater
• Out of range indication: Display symbol “---”
• Heart symbol flashes for each QRS detection
• QRS Detection Range
• Duration: 40 to 120 ms
• Amplitude: 0.5 to 5.0 mV
• Continuous Patient Surveillance System (CPSS)
• In advisory mode, while Shock Advisory System is not active, CPSS monitors the patient, via QUIK-COMBO paddles or Lead II ECG, for potentially shockable rhythms.
• Voice Prompts: Used for selected warnings and alarms (configurable on/off).
• Analog ECG Output: 1V/mV x 1.0 gain
• Common Mode Rejection: 90 dB at 50/60 Hz

SpO2 (Masimo Sensors)

• Saturation Range: 1 to 100%
• Saturation Accuracy
• Adults/Pediatrics: ±2 digits (during no motion conditions); ±3 digits (during motion conditions)
• Neonates
• ±3 digits (during no motion conditions); ±3 digits (during motion conditions)
• Dynamic signal strength bar graph
• Pulse tone at the onset of the pleth waveform
• SpO2 Update Averaging Rate: User selectable 4, 8, 12 or 16 seconds
• SpO2 measurement: Functional SpO2 values are displayed and stored
• Pulse rate range: 25 to 240 pulses per minute
• Pulse Rate Accuracy
• Adults / Pediatrics / Neonates: ±3 digits (during no motion conditions); ±5 digits (during motion conditions)
• SpO2 waveform with autogain control
• Nellcor sensors when used with MNC-1 adapter

NIBP

• Blood Pressure
• Systolic Pressure range: 30 to 245 mmHg (4 to 32.7 kPa)
• Diastolic Pressure range: 12 to 210 mmHg (1.6 to 28 kPa)
• Mean Arterial Pressure range: 20 to 225 mmHg (2.7 to 30 kPa)
• Units: mmHg, kPa, (user configurable)
• Blood Pressure Accuracy: maximum mean error of ±5 mmHg
• (±0.7 kPa) with a standard deviation no greater than ±8 mmHg
• (±1.1 kPa)
• Blood pressure measurement: 40 seconds, typical
• Pulse Rate
• Pulse Rate range: 30 to 200 pulses per minute
• Pulse Rate accuracy: ±2 pulses per minute or ±2%, whichever is greater
• Operation Features
• Initial Cuff Pressure: User selectable, 100 to 180 mmHg
• Automatic Measurement Time Interval: User selectable
• Automatic Cuff Deflation
• Excessive Pressure: If cuff pressure exceeds 300 mmHg
• Excessive Time: If measurement time exceeds 120 seconds

CO2

• CO2 Range: 0 to 99 mmHg (0 to 13.2 kPa); Units: mmHg, kPa, % (user configurable)
• CO2 Accuracy (0 to 20 minutes): 0 to 38 mmHg (0 to 5.1 kPa): ±4 mmHg; 39 to 99 mmHg (5.2 to 13.2 kPa): ±12% of reading
• CO2 Accuracy (>20 minutes): 0 to 38 mmHg (0 to 5.1 kPa): ±2 mmHg; 39 to 99 mmHg (5.2 to 13.2 kPa): ±5% of reading; +0.08% for every 1 mmHg (0.13 kPa) above 38 mmHg
• Respiration Rate Range: 0 to 60 breaths/minute
• Respiration Rate Accuracy: 0 to 40 bpm: ±1 bpm; 41 to 60 bpm: ±2 bpm
• Warm up time: 30 seconds (typical), 180 seconds maximum
• Rise Time: 190 ms
• Response Time: 2.9 seconds (includes delay time and rise time)
• Ambient Pressure: Automatically compensated internally
• Optional Display Waveform: CO2 Pressure

IP

• Transducer Type: Strain-gauge resistive bridge
• Transducer Sensitivity: 5μV/V/mmHg
• Excitation Voltage: 5Vdc
• Connector: Electro Shield CXS 3102A 14S-6S
• Bandwidth: Digital filtered, dc to 30 Hz (< -3db)
• Zero Drift: 1 mmHg/hr without transducer drift
• Zero Adjustment: ±150 mmHg including transducer offset
• Numeric Accuracy: ±1 mmHg or 2% of reading, whichever is greater, plus transducer error
• Pressure Range: -30 to 300 mmHg in six user selectable settings
• Pulse Range: Pulse rate not derived from IP, IP monitor functions over the full ECG/SpO2/NIBP HR/PR range of 20–300 bpm
• Leakage Current: Meets ANSI/AAMI/IEC leakage requirements
• IP Connector Pinout: Counterclockwise from 12 o’clock, viewed from the front of LIFEPAK 12:
• A pin = -signal; B pin = +excitation; C pin = +signal;
• D pin = -excitation; E pin = shield; F pin = unlabeled.
• Invasive Pressure Display
• Display: IP waveform and numerics
• Units: mmHg, kPa (user configurable)
• Labels: P1 or P2, ART, PA, CVP, ICP, LAP (user selectable)

Trend

• Display: Choice of HR, SpO2 (%), EtC02, FiCO2, RR, NIBP, P1, P2, STM shown in Channels 2 or 3
• Time Scale: Auto, 30 minutes, 1, 2, 4, or 8 hours
• Duration: Up to 8 hours with -06 or later Memory PCB. Reduced storage capacity with earlier versions.

ST

• After initial 12-lead ECG analysis, automatically selects and trends ECG lead with the greatest ST displacement

Alarms

• Quick Set: Activates alarms for all parameters
• VF/VT Alarm: Activates continuous CPSS monitoring in Manual Mode
• Apnea Alarm: Occurs when 30 seconds has elapsed since last detected respiration
• Heart Rate Alarm Limit Range: Upper, 100–250 bpm; lower, 30–150 bpm

Interpretive Algorithms

• 12-Lead Interpretive Algorithm: GE Medical 12SL, includes AMI statements

Printer

• Prints continuous strip of the displayed patient information
• Paper Size: 50 mm (2.0 in) or optional 100 mm (3.9 in)
• Print Speed: 25 mm/Sec ±5% (measured in accordance with AAMI EC-11, 4.2.5.2) Optional 50 mm/sec time base for 12-Lead ECG reports
• Delay: 8 seconds
• Autoprint: Waveform events print automatically (user-configurable)

Frequency Response

• Diagnostic Frequency Response: 0.05 to 150 Hz or 0.05 to 40 Hz (user-configurable)
• Monitor Frequency Response: 0.67 to 40 Hz or 1 to 30 Hz (user-configurable)
• Paddles Frequency Response: 2.5 to 30 Hz
• Analog ECG Output Frequency Response: 0.67 to 32 Hz (except 2.5 to 25 Hz for Paddles ECG and 1.3 to 23 Hz for 1 to 30 Hz Monitor Frequency Response)